Timbren Active Off-Road Bumpstops with Ubolt Flip Kit ABSTRFK
he Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement.
Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
The ABSTRFK replaces the rear bumpstops on the Toyota Tacoma. Included in this kit is a U-Bolt flip kit to allow for more ground clearance. Install a bumpstop kit and experience the difference.
2014-2020 TOYOTA TUNDRA TRAIL EDITION ROCK SLIDERS
Protect your truck with the Apex Fabworks Rock Sliders. Made from massive 2.0" DOM tubing, we don't up charge you for better material or for features like kick outs. Our sliders are made the best way we know how for the best fit and protection standard, no up charge. These sliders are 100% bolt-on with no drilling or modification to your vehicle required, and come with all the required hardware you need for the install.
Fits Crew Max Short Bed
Cancellation of a slider order will incur a 15% cancellation fee after the order is placed. This is a custom product made specifically for your vehicle and can not be changed.
- Easy installation, read our installation instructions or watch the installation video below for a step by step guide
- The outer tube is at a 0 degree angle, but is nice and tight to the truck.
- Comes with everything required for install
- Choose one of our great shipping methods to get fast safe and low cost shipping to your home or pick up at one of our affiliates for a discount
- Residential Delivery With Lift Gate Service: Freight Company will deliver the Sliders to your house on a pallet and provide assistance (if needed) with unloading. Freight shipping takes roughly 5-10 days depending on your location. Once the order is placed we will contact the freight company to set up the shipping services. Once shipped you will be provided with a master # to track your shipment.
-Delivery To A Business: Freight Company will deliver the Sliders to a business location on a pallet. Freight shipping takes roughly 7-14 days depending on your location. Once the order is placed we will contact the freight company to set up the shipping services. Once shipped you will be provided with a master # to track your shipment.
-Will Call Pickup From Cali Raised: When The order is placed it will be prepped for pickup. One of our representatives will contact you when the sliders are available for pickup. We also offer Installation services at an additional fee that can be scheduled before pickup.
SHIPPING OUTSIDE THE LOWER 48:
If looking to place an order from outside the lower 48 please contact us and we can put together a special quote for you and get you set up.
LP4 PRO SERIES AMBER LED DRIVING COMBO LIGHT - PAIR - 297813
The LP4 is the smallest variant in the LP line up but maintains all of the power and features of its siblings. The LP4 features a total of 8,750 lumens and a 200° spread of useable LED light. This light pumps out 7,050 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT).
To keep your light performing at its highest potential, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks - drastically improving cooling capacity and performance.
With an amber day-time running light, the LP4 will fulfill all your lighting needs.
Baja Designs Features: Satisfactions Guarantee – 30 Day Money Back Guarantee Limited Lifetime Warranty – Complete Purchase Protection uService® – Replaceable Lenses And Optics ClearView® – All The Light, Right Where You Need It. MoistureBlock™ – Waterproof, Rain Proof, Submersible CopperDrive® – Only LED Driven At 100% 5000K Daylight – Less Driver Fatigue, Natural Color
Backlight Wattage/Amps: 4.83W / 0.35A Dimensions: 5.1" Height / 5.1" Width / 3.2" Depth Weight: 2.8lbs LED Life Expectancy: 49,930 Hours Front Lens: Hardcoated Polycarbonate Housing: Hard Anodized Machined Aluminum Bezel: Billet Machined Aluminum Hardware & Bracket Material: Stainless Steel Exceeds MIL-STD810G (Mil-Spec Testing) Built-In Overvoltage Protection IP69K (Waterproof up to 9ft & Pressure Washable) IK10 Compliant (Mechanical Impact Testing)
QTY (2) LP4 LED Light
QTY (1) Wiring Harness
Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)
High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)
Push To Start Button - Meso Customs
A simple and elegant Start button for all Toyota Tacoma models with PUSH TO START. No modifications necessary. The factory push button pops off with the included tool and the new replacement snaps right in it's place. 3D scanned for OEM dimensional accuracy so the fit and finish is just like factory. The Logo is transparent so it will illuminate blue like stock.
Available in 5 different configurations;
1)RED TRD-LARGE FONT 2)RED TRD/START/STOP- LARGE FONT 3)RED TRD/START/STOP-SMALL FONT 4)BLACK TRD- SMALL FONT 5)BLACK TRD/START/STOP-SMALL FONT 6)BLACK TRD/START/STOP- LARGE FONT
*** Does not include start trim ring. (FromChrome Delete Kitor as stand alone product.)
2016-up TACOMA must havePUSH TO START BUTTON(smart key)
2020+ Toyota Anytime Backup and Front Camera - Full Kit
VIEW YOUR FACTORY BACKUP CAMERA AT ANYTIME PLUS ADD A FRONT FACING CAMERA TO VIEW AT ANYTIME!
Our Anytime Backup and Front Camera kits allow you to view your rear camera at any timeANDadd a front facing camera. The harnesses will plug directly into the back of your factory in-dash screen with no cutting or modification to the factory wires required! Once the harnesses are plugged in, simply connect the wires from the harness to our factory style switch!
The switch is the 'small' OEM Style switch and it features a fully controllable and dimmable back light.
1x - Anytime Backup Camera Override Harness (Orange and Red Wires)
1x - Anytime Backup Camera RCA video harness (Two Yellow RCA MF and Blue/Gray Wires)
1x - RCA Video switching relay (Three Yellow RCA MFF and Green/Black wires)
1x - OEM Style Single Pole Double Throw (SPDT) Front/Rear Switch with Harness*
1x - Front/Rear facing Camera**
This kit is designed for 2020+ Toyota vehicles (some 2019s as well). If you have a model with a 360 degree camera system then this will not work for you.
And more! Email if you would like to know if this works with your vehicle.
*OUR SWITCH IS THE 'SMALL' OEM STYLE SWITCH FOR AN OPENING MEASURING 1.28" X 0.87". THIS WILL NOT FIT IN THE TALLER SLIM OPENINGS.
**PLEASE NOTE THE FRONT CAMERA INCLUDED IN THE KIT MUST BE MOUNTED WITH THE THREADED NIPPLE AND WIRE FACING UP (VERTICALLY).
Stainless Steel Truck Cap/Canopy for (2020) Jeep Gladiator
**Arriving September – Accepting Pre-Orders Now! Pictures Coming Soon.**
RLD Design truck canopies are all 5-axis press bent and TIG welded stainless steel and come fully powder coated with specialty textured coating, offering superior durability and longevity, and incredible strength and load capacity (over 700 lbs dynamic load*). All canopies come standard with black rear and side doors. Optional, door color, paint matching, and RAL color code powder coating available by special order.
NOTES: Canopy options and accessories (excluding windows) do not come pre-installed. Fulfillment and shipping times may be up to 60 days depending on options and color ordered. Please inquire for lead times.
*Canopies are rated at 700lbs dynamic load, but please always check with your vehicle’s manufacturer as to the load of your truck bed.
Features of the Stainless Steel Canopy include:
Stainless steel construction for incredible strength and durability
Front (cab-end) sliding window
Solid rear toughened glass window
Oversized adjustable pressure lever locks
2x Gas struts per door
Full-length side doors
3x Rails formed into roof section for increased rigidity and strength. Pre-drilled (sealed) points to allow mounting of modular accessories, including RLD Design rack systems, interior side cabinets, roof-mounted drop-down table, etc.
Weight: 175 lbs
03-09 4Runner Front Coil Overs Extended Travel - 25001-124-EXT
03-09 4Runner Front Coil Overs Extended Travel Made by King Shocks Part Number: 25001-124-EXT Kings new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension system that elevates your on and off-road performance to unmatched levels. Each kit has been subjected to punishing real world testing to develop the optimal damping curves and spring rates for your vehicle. Built with the same quality of materials and precise tolerances found on our high end race shocks our OEM upgrade kits enable you to experience the famous King ride quality on your daily driver or prerunner.