REPLACEMENT POWER CABLE FOR THE SWITCH-PRO
First off it is important to clarify that the Switch-Pro already includes a 2' power cable w/ 100A inline fuse. This cable is long enough to reach the unit on the PowerTray from the factory battery location, but its tight and has to come up from the side.
So if you're powering your Switch-Pro from your factory battery then this is just an optional power cable that is 1ft longer so that you can come up from the back of the tray. Also it's a black cable wrapped in Tecflex w/ red heat-shrink, so it will match any other cables coming from Powertrays or Off-Grid Engineering. For this cable a single MRBF terminal fuse holder W/ 125A Fuse for the SP9100.