Wire Harnesses/Splitters/Relays

COMBINING THE POWER OF THE SWITCH-PROS MODULE WITH THE ORGANIZATION OF BLUE SEA SYSTEMS GIVES YOU EVERYTHING YOU NEED TO ORGANIZE AND MAINTAIN YOUR ELECTRICAL ACCESSORIES LIKE THE PROFESSIONALS.

WHETHER YOU'RE A WEEKEND WARRIOR OR TOURING FULL TIME, THE SWITCH-PROS POWERTRAY SYSTEM HAS YOU COVERED. 

Specs: 

All PowerTrays are Waterjet cut out of robust 1/8" Brushed Aluminum and perfectly bent to match the angle of the inner fender. PowerTrays achieves unparalleled stability utilizing three points of contact with the use of an additional support leg that secures the far side of the tray by bolting it down to the lower fender. Ships right to your front door with full color instructions. Designed, Made, and Shipped from Colorado.

 Product Includes:

(Sold as pair) Connect this pigtail to a LED pod to make an easy connection to your fog light Factory Wire harness. Simply connect to the LED pod then plug into your vehicles OEM Fog light wire harness. CRSAH0013

 SOLD AS PAIR (2) 

SKU#125107

Vertical Mount Switch-Pro PowerTray Installation kit includes:

• Blue Sea 6 circuit fuse block
• Blue Sea 8 circuit terminal block
• Blue Sea 10 screw busbar
• Blue Sea Dual MRBF Terminal Fuse Holder
• 100A MRBF Fuse (for fuse block)
• 125A MRBF Fuse (for Switch-Pros)
• 2’ power cable (battery to SP)
• 2’ power cable (battery to Fuse Block)
• 3’’ stubby ground (Fuse block to busbar)
• 1’ ground cable (Busbar to fender ground)
• 10 ring terminals (5 large, 5 small)
• Mounting hardware for all accessory's (Highest quality Stainless Steel machine screws with matching k-star locking nuts)

*Switch-Pros and PowerTray purchased separately.

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our Fuego, PreRunner, LaPaz, Squadron and SII. 

It includes an On/Off toggle button to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED/HID lights listed above.

BD SKU: 640117

(Sold as pair) Connect this pigtail to a LED pod to make an easy connection to your fog light Factory Wire harness. Simply connect to the LED pod then plug into your vehicles OEM Fog light wire harness. CRSAH0012

Fits Toyota Model years 2005-2011 Tacoma, 4Runner, Tundra 

SKU# 125106

Quick Connect Harness for ARB Compressors (all models).

SKU#125128

Ignite the night with the Cali Raised LED Vehicle DT Plug Splitters. Our DT plug splitters allow you to turn a single leg LEG wiring harness into a dual leg harness. If you are adding another LED to your rig and want to use the same switch, just plug these in and go, just ensure the amp draw is not too much for the original harness. Combine all these great features with our two year warranty on all vehicle lighting and accessories so you can drive into the darkness and ignite the night.

SKU#125105

Features

• Easy installation, watch our installation videos for a step by step guide
• Works with other DT harnesses and accessories
• Approximately 7" Long
• Sold As Single Splitter (qty1 per package)

JUST A CONVENIENT WAY TO ADD ALL THE CABLES YOU'LL NEED WHEN WIRING UP THE BLUE SEA 12 CIRCUIT POWERTRAY.

BUNDLE INCLUDES 3 CABLES:

This harness takes all the guess work out of installation and is incredibly high quality suited for race use!

Put your dimmer/backlit mode to use!

Options:

• Baja Designs OnX6 Hybrid Laser/S8 Wire Harness w/Mode-1 Bar / 640122

Features:

• Includes‘_On/Off Toggle switch for primary light bar function, as well as a separate On/Off switch for secondary (Amber Backlight/ Laser) function.‘_
• Heavy duty wire gauge that can handle any size bar
• Complete with battery ring terminals, relay, sheathing, fuse
• 100" wire length between battery ring terminals and weather pack for bumper or roof mounting

Application:

• OnX6, Hybrid LED and Laser Light Bars
• S8 LED, Light Bars

• Circuits: 8
• Continuous Rating: 30A
• Bus Material: Nickel-Plated Brass
• Terminal Screw Size: #8

MOUNTING HARDWARE: 

High quality M5x0.8 stainless steel machine screws with locking serrated flange nuts will securely fasten this BusBar to the PowerTray and keep it there for good. Hardware comes the exact length needed for a professional looking install.

**Electrical Accessories may take up to one week to ship

THE SWITCH-PRO/BLUE SEA POWERTRAY PROVIDES A WELL THOUGHT OUT DESIGN FOR ALL YOUR AFTERMARKET WIRING NEEDS.

SPECIFICALLY DESIGNED WITH YOUR VEHICLE IN MIND.

Tray Includes:

RECOMMENDED FOR USE WITH:

TRANSMISSION:

MODEL:

This version is made for non-ATRAC Tacoma models. (ie. SR, SR5, TRD Sport, and Limited models) 

For TRD Off-Road/Pro models Click Here

Specs: 

All PowerTrays are Waterjet cut out of robust 1/8" Brushed Aluminum and perfectly bent to match the angle of the inner fender. PowerTrays achieves unparalleled stability utilizing three points of contact with the use of an additional support leg that secures the far side of the tray by bolting it down to the lower fender. Ships right to your front door with full color instructions. Designed, Made, and Shipped from Colorado.

 Product Includes:

THE BLUE SEA 12 CIRCUIT POWERTRAY PROVIDES A BASE STATION FOR WIRING IN ALL YOUR AFTERMARKET ACCESSORIES. 

SPECIFICALLY DESIGNED WITH YOUR VEHICLE IN MIND.

PRODUCT INCLUDES:

RECOMMENDED FOR USE WITH:

TRANSMISSION:

MODEL:

This option has more to to do with Tacoma models as the braking system changes between models. 

4Runners / FJ Cruisers / GX 470 vehicles are unaffected by model and don't really need to worry about this question. select N/A if model is unknown.

THE BLUE SEA ST BLADE FUSE BLOCK CAN OFFER A SPACE SAVING AND COST EFFECTIVE SOLUTION TO ADDING CIRCUIT PROTECTION WHEN THERE ARE LIMITED AVAILABLE CIRCUITS ON YOUR PRIMARY DISTRIBUTION PANEL.

ST Blade ATO/ATC fuse blocks consolidate branch circuits and eliminate the tangle of in-line fuses for aftermarket electronics. Their robust design makes them ideal for marine and vehicle DC electrical systems.

All buses and fuse clips are tin plated copper for corrosion resistance and optimal electrical conductivity.

ST Blade fuse blocks utilize a specialized fuse clip that is designed to hold fuses in place in the harshest conditions.

All fasteners are stainless steel. Screws contain a captive star lock washer for a faster more secure installation. Studs utilize flange nuts for a simpler and safer installation. Fuses sold separately.

Mounting Hardware: 

4 high quality M4x0.7 stainless steel machine screws with matching K lock nuts will securely fasten this fuse box to the PowerTray and keep it there. Hardware comes the exact length needed for a professional looking install.