The LP4 is the smallest variant in the LP line up but maintains all of the power and features of its siblings. The LP4  features a total of 8,750 lumens and a 200° spread of useable LED light. This light pumps out 7,050 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT).

To keep your light performing at its highest potential, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks - drastically improving cooling capacity and performance. 

With an amber day-time running light, the LP4 will fulfill all your lighting needs. 

Inlcudes: 

• QTY (2) LP4 LED Light
• QTY (1) Wiring Harness

Patterns:

Driving/Combo: Maximum trail coverage in a single light.  The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road.  The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

A simple and elegant Start button for all Toyota Tacoma models with PUSH TO START. No modifications necessary. The factory push button pops off with the included tool and the new replacement snaps right in it's place. 3D scanned for OEM dimensional accuracy so the fit and finish is just like factory. The Logo is transparent so it will illuminate blue like stock.

Available in 5 different configurations;

1) RED TRD-LARGE FONT
2) RED TRD/START/STOP- LARGE FONT
3) RED TRD/START/STOP-SMALL FONT
4) BLACK TRD- SMALL FONT
5) BLACK TRD/START/STOP- SMALL FONT
6) BLACK TRD/START/STOP- LARGE FONT

*** Does not include start trim ring. (From Chrome Delete Kit or as stand alone product.)

Fits:

2016-up TACOMA must have PUSH TO START BUTTON(smart key)

 Install Guide:

https://youtu.be/epzffJxHOEI

(2020+) Jeep Gladiator Cap/Canopy

Starting at $3,299.99

• For 2nd and 3rd gen Toyota Tacoma (2005-2020). The Mountain Hatch replaces your Toyota Tacomas OEM inner hatch panel to give you a much flatter surface. Now your Tacoma tailgate can serve as table whether tailgating, camping or if  just want to set that hot cocoa down. This product is a heavy duty FDA approved 1/2 inch plastic with UV inhibitors. Like a cutting board, it is also food safe. There is no extra hardware needed because it reuses your Toyota Tacoma's OEM screws. Just remove your Toyota Tacomas factory screws, remove OEM panel and replace with THE Mountain Hatch panel. It's that easy. The Mountain Hatch is made right here in the USA. Your Tacoma tailgate will never be the same. 🇺🇸

Note: The Mountain Hatch panel can be extremely slippery in wet or icy conditions - much like the OEM panel. 

he Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement.

Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

The ABSTRFK replaces the rear bumpstops on the Toyota Tacoma. Included in this kit is a U-Bolt flip kit to allow for more ground clearance. Install a bumpstop kit and experience the difference.

• Maximize Axle Travel
• Smooth Axle Engagement & Disengagement
• U-Bolt Flip Kit Included
• Enhance Rear Suspension Performance
• Progressive Spring Rate
• Absorbs Energy & Cushions Road Shocks
• Stronger Than OEM Bumpstops
• Easy Installation
• Lifetime Warranty
• Satisfaction Guarantee

• Maximize Axle Travel
• Smooth Axle Engagement & Disengagement
• Enhance Suspension Performance
• Progressive Spring Rate
• Absorbs Energy & Cushions Road Shocks
• Stronger Than OEM Bumpstops
• Easy Installation
• Satisfaction Guarantee
• Lifetime Warranty