This Kit fits the Harley Davidson Dyna Bikes with Narrow Forks Using 3.5" Handle Bar Bolts. It Sets your LP6 out enough to run a Memphis Shades Fairing and most likely others..
Made with performance in mind, our bracket is extra thick where it needs to be to insure a vibration free fit.
There is 5/8 of up and down adjustment as well as 5/8" adjustment on how far light sticks out past forks. (Fore ward and Back)
Easy to Install using our wire harness kit.
NOTE: This Kit will position your light outward "more" than ideal for a naked Look. If you have a Dyna Narrow and wish to have only a Naked Bare LP6, (Not Run a Fairing) We suggest Part Number: 127076. That is the same set up, it just pulls light back tight.
Why CRO Moto..
CRO Moto & Baja Designs work closely together to insure we offer only the best kits available. Our Kits are available World Wide and have been engineered to insure the proper performance of your Baja Designs Lights while NOT utilizing the factory harness to power these added lights.
We are working hard to bring you kits that offer expansion to allow for S1, S2 and other high performance lights offered by Baja Designs.
| QTY | Brackets Included In this Kit |
| 1 |
127086-1 Main Mount |
| 1 |
127074-2B LP6 Mount |
| 1 | 127086-3 Lower Support Bracket |
| QTY | Hardware Description |
| 6 |
1/4 x 20 x 5/8L Stainless Bolts |
| 8 |
1/4" Mil Spec Stainless Washers |
| 2 | 1/4x20 Stainless nylock nuts |
| 1 | 5/16x24x1 3/4 Grade 5 Socket Head |
| 1 | 5/16x24 Nylock Nut Grade 5 |
| 1 | 5/16 Grade 5 Washer |
Lease for as low as $/week