Accessories

According to vehicle code 24411 anyone with any auxiliary lights being operated on any highway your lights are to be covered. These covers will make your LED lights street legal. (requires install of small magnets on the lens of your light) Has no affect on the light, output, or warranty. Covers include everything for the installation (Magnets and Glue) 

Cover sizes are referring to the length of the lens. For example a 32" LED Bar Has a lens length of 30". If needing a custom size please email us Sales@caliraisedoffroad.com

These Covers are all cut to order and manufactured offsite. They carry a 3 week lead time. 

Install Instructions 

Protect Your LED Bar with this security hardware. Removing or loosening the screws is difficult, if not impossible without the correct driver. INCLUDES: (2) Bolts, (1) driver bit

SKU#125110

The Minimalist Key Fob is a replacement remote case with a better design and functionality than stock.  Each housing is injection molded out of durable PC+ABS material to defend against dings and scratches. By removing the factory spare key from the side of the OEM remote we are able to reduce the overall size by 25%. Each fob will include all black buttons, a stainless steel bottle opener bar, a standard key ring bar, and all necessary hardware to swap with your factory remote.

All 3rd Generation Tacomas with Smart remotes. 2016+ only.

Does not retain factory key, you will need to store it elsewhere.

A Simple but effective solution to hold your gas cap during fill ups. Direct bolt in for an easy installation. Fits OEM Gas caps. Available for Long bed and Short bed.

**INSTALLATION** 

1) Remove Phillips head bolt from inside fuel door (TIP: Use a #2 bit on an impact while holding pressure on the door. Toyota has been known to install these tight)

2) Slip Gasshole's right side groove into the metal fuel door

3) Reinstall Screw over Gasshole tab.

Protect your factory ABS sensors while offroading with our SDHQ Built Billet ABS guards. Constructed out of anodized 6061 Aluminum this easy bolt-on modification was designed to protect your vehicle's front and rear ABS sensors. 
These guards can save you upwards of $500!

KEY FEATURES:

• Billet 6061 Aluminum
• Protects factory ABS sensors from rocks and debris.
• Includes hardened 12.9 hardware
• Easy to install
• Includes (2) M6 nuts to aid factory stud removal
• Anodized clear for corrosion protection

Tired of splicing and cutting up your vehicle's wiring when installing your off-road accessories?
Upgrade your vehicle's main battery terminals with SDHQ's HD Main Billet Terminal Upgrade Kit. With up to five additional terminal pads our kit provides the safe and orderly installation of accessories such as off-road lighting, audio equipment, winches, and air compressors while maintaining your vehicle's factory wiring
Our kits were 3D CAD Designed and manufactured from high quality 6061 Aluminum.

KEY FEATURES:

• Fits most Toyota, Nissan and similar style terminals.
• Five additional terminal pads
  • 2 - 3/8" Terminal pads
  • 1 - 5/16” Terminal pad
  • 2 - 1/4" Terminal pads
• Ability to retain all factory wiring
• Positive and Negative Billet 6061 Aluminum Terminals.
• Complete Hardware Kit
  • Stainless Steel Hardware with included Anti-Seize Compound.

TECH NOTES:

• Tacomas/Nissans can cut off the negative battery terminal and use provided compression lug or alternately use the Negative Terminal Stud Adapter.
• 1-2 AWG Copper Compression Lug included to replace terminal.
• Recommended for use with sealed batteries.
• Torque Specifications:

• Torque ¼” - 20 Hardware to 4 ft-lb.
• Torque 5/16” - 18 Hardware to 8 ft-lb.
• Torque ⅜” - 16 Hardware to 18 ft-lb.  

FITMENT:

• Toyota:
  • Tundra (2000-2019)
  • Tacoma (1995-2019)
  • 4Runner (1996-2019)
  • FJ (2007-2014)
• Nissan:
  • Armada (2004-2015)
  • Titan (2004-2015)
  • Frontier (2005-2019)
  • Pathfinder (2005-2012)
  • Xterra (2005-2015)