Installation based on purchasing parts from Cali Raised Offroad. This cost is for standard installation of our Bed Stiffeners. Removal of tail lights, locating holes, removing bed support bolts and installing stiffener brackets. Complete reassembly and finish.
Estimated Time 45 Minutes
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate. Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components.
Body Mount Chop Fabrication for Toyota Tacoma, 4runner or Tundra
125926L
Regular price$350.00
Save $-350.00
Let Cali Raised Offroad provide the maximum clearance for those large diameter tires.
NOT ALL BMC ARE CREATED EQUAL: We remove a larger section of the mount than others. We use 12 Guage Steel and Cut the mount well beyond the body kick panel with a slanted approach giving you the ability to run 35" Tires with the proper lift and wheel combination. This extra cutting requires more fab time and welding than simply "nicking off" the face corner as many do.
We clear 3 key areas on your truck to provide added clearance for tires.
A. The front body mount is chopped back beyond the body panel and we use a 12 Gauge metal tab keeping the factory mount to its maximum strength. See area "A" on illustration picture attached.
B. The Pinch Weld is folded over and cleaned up from below body curve to just below the lower inner fender mount. See area "B" on illustration picture attached.
C. Inner fender and plastic fender-well is trimmed on the inside to allow for maximum clearance when tire is turned. NOTE: We trim a standard amount as per illustration "C", More can be done at any time.
Special Pricing: If we are replacing / upgrading suspension components at the same time, we will include the $39.99 brackets for free.
This is our Standard Body Mount Chop for the front driver and and passenger side front most mount under the A-Pillar. This is a modification which requires cutting and removal of the front most side of the factory mount. We then add one of our CRO Brackets to insure the strength is returned.
This mod provides about 1.25" additional clearance for those tires.
Estimated Time 2.5-3 Hours
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate. Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components.
Ditch Light Labor Only
125927L
Regular price$100.00
Save $-100.00
Installation based on purchasing parts from Cali Raised Offroad. This cost is for standard installation including a switch either our OEM Style or the one that comes free with our wire harness.
Estimated Time 1 Hour
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate. Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components.
Fog Light Installation using adaptor plug Labor Only
125928L
Regular price$80.00
Save $-80.00
This installation is for the removal of the factory Fog light bezel, and installation of our replacement Fog Light Bracket and your choice of compatible Pod Lights. This installation allows the Fog Lights to work using the factory mounted turn signal switch.
Estimated Installation Time: 1.25 Hours
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate. Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components.
Labor Suspension Front End Components Tacoma/4Runner/Tundra
Toyfrnt_Labor1
Regular price$400.00
Save $-400.00
This is our labor rate for installation of suspensions parts purchased from Cali Raised Offroad.
This does not include any parts.
This does not apply to customer supplied components.
Labor Suspension General Install
Sus_labor2-3
Regular price$300.00
Save $-300.00
This is our labor rate for installation of suspensions parts purchased from Cali Raised Offroad.
This does not include any parts.
This does not apply to customer supplied components.
Labor/Installation Rate
125930L
Regular price$25.00
Save $-25.00
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate. Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components.
Labor/Installation Roof Top Tent
TentLabor.50
Regular price$50.00
Save $-50.00
This is our labor rate for Installing Root Top Tent onto a Rack or Designated Surface.
Estimates are based on $100 / hour
This does not include any parts.
This does not apply to customer supplied components.
Lower Bumper Light,Bracket, harness & switch Labor Only Chevrolet ZR2/Colorado
125931L
Regular price$180.00
Save $-180.00
For Chevrolet ZR2 and Colorado Installation includes removal of bumper as needed, grille and installation of our light bar brackets, light bar and wire harness. Professionally wired direct to battery so that it can be operated without the ignition on. We use an in line fuse , relay and run insulated wires through the firewall to a compatible switch.
Estimated Install Time: 2.0 hours
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate.
Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components. Free Wifi
Lower Bumper Light,Bracket, harness & switch Labor Only Tacoma,4Runner
125932L
Regular price$120.00
Save $-120.00
For Toyota Tacoma and 4 Runner Installation includes removal of bumper as needed, grille and installation of our light bar brackets, light bar and wire harness. Professionally wired direct to battery so that it can be operated without the ignition on. We use an in line fuse , relay and run insulated wires through the firewall to a compatible switch.
Estimated Install Time: 1.50 hours
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate.
Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components. Free Wifi
Lower Bumper Light,Bracket, harness & switch Labor Only Toyota Tundra
125933L
Regular price$140.00
Save $-140.00
For Toyota Tundra Installation includes removal of bumper as needed, grille and installation of our light bar brackets, light bar and wire harness. Professionally wired direct to battery so that it can be operated without the ignition on. We use an in line fuse , relay and run insulated wires through the firewall to a compatible switch.
Estimated Install Time: 1.25 hours
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate.
Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components. Free Wifi
Mount and Balance Tires Labor Only
130257
Regular price$30.00
Save $-30.00
Labor for Mounting and Balancing Tire on Wheel.
• Price is for each
Example: For set of 4 wheels and tires add 4 to cart.
Non-Taxable
Prinsu / Front Runner Light bar Installation Labor
125934L
Regular price$150.00
Save $-150.00
For most trucks, this Installation includes the installation of one of our 42" light bars to a Prinsu Brand Rack or Front Runner brand. Standard installation is included. Cutting or modifications for other lights are quoted at Std. shop rate.
Includes mounting of stock OEM Switch, and using one of our wire harnesses. Professionally wired direct to battery so that it can be operated without the ignition on. We use an in line fuse , relay and run insulated wires through the firewall to a compatible switch.
Estimated Install Time: 1.20 hours
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate.
Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components. Free Wifi
Prinsu/Front Runner Roof Rack Assembly and Installation for Subaru/Rav4
131093
Regular price$400.00
Save $-400.00
Installation based on purchasing parts from Cali Raised Offroad. This cost is for standard installation of one our modular roof racks that we carry. With drilling of additional holes needed to secure rack to roof. We will drill holes and install Rivet Nuts in roof, seal and secure rack. This labor also includes the removal and reinstallation of the headliner required for installation.
We assemble roof rack and install on your vehicle here at our shop in Buena Park.
NOTE: This labor estimate is based on a clean install with no existing rack.
Estimated Time 3.5-4 Hours.
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate. Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components.
Prinsu/Front Runner Roof Rack Assembly and Installation Standard Install No Drilling.
125993L
Regular price$200.00
Save $-200.00
Installation based on purchasing parts from Cali Raised Offroad. This cost is for standard installation of one our modular roof racks that we carry. We assemble roof rack and install on your vehicle here at our shop in Buena Park.
NOTE: This labor estimate is based on a clean install with no existing rack. This install does not include custom fabrication or drilling and inserting of Rivet Nut Inserts"
Estimated Time 2 Hours.
Cali Raised Offroad is now offering installation on everything we sell. Contact us for a free estimate. Come enjoy our spacious customer lounge and watch some tv or get caught up on your social media while we install your components.