MAXTRAX Mounting Pins are the easiest, safest, and most-secure way to mount your genuine MAXTRAX Recovery Boards. Because of the unique design of our patented Keyhole, our Mounting Pins can carry either one or two sets of MAXTRAX (two or four boards) and their M10 stainless bolt has a provision for a small TSA-style padlock. Two individual rotating Nylon “keys” allow you to securely restrain your MAXTRAX while the primary component remains stationary, attached to your roof or bed rack, or custom mounting application.
Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
Genuine MAXTRAX MKII Mounting Pins are the easiest, safest, and most secure mounting solution for putting your MAXTRAX MKII on a roof rack, bed rack, or cross-bars.
MAXTRAX Mounting Pins are 5.5 inches long (140mm) and feature a stainless steel M10 threaded shaft with a 1-5/8 inch (41mm) length that can be cut to fit in tight applications. Sold in a package of four pins, enough to mount either two or four MAXTRAX MKII or Mini family recovery boards. Will not rust or corrode.
Exact mounting dimensions may vary up to 1%. Measure twice, cut once.
MAXTRAX Mounting Pins are designed to interface perfectly with our patented Keyhole mount. This clever system allows you to mount either two or four boards (one or two pair) with the same Mounting Pin kit.
They're even lockable and accept a TSA-style padlock.
Made from high-quality Nylon and tough stainless steel, MAXTRAX Mounting Pins are designed to take abuse, whether that's from the elements or the occasional knock from a tree branch on the trail.
BOLTS-ON TO ROOF AND BED RACKS
We've worked with industry leading companies such as Front Runner, Rhino Rack, Eezi-Awn, Prinsu, Leitner Designs, and more to ensure that it's easy to mount your MAXTRAX without any custom fabrication.
We warranty our MAXTRAX Mounting Pins like we do our recovery boards—for life.
MAXTRAX Mounting Pin FAQ
WILL THESE BOLT TO MY CROSSBARS?
When cut to fit, MAXTRAX Mounting Pins will directly bolt into any M10 threaded Aero-style crossbar. If your crossbar does not accept M10 threaded fasteners, drilling may be required*.
For tube-style crossbars, we recommend our MAXTRAX Tube Mount. You will need to exactly measure the diameter of your crossbar tube prior to purchase.
*Always consult your crossbar manufacturer prior to drilling.
CAN I USE THESE WITH COUNTERFEIT RECOVERY BOARDS?
MAXTRAX has industry-leading manufacturing tolerances and patented features to ensure your safety with all of our products.
When MAXTRAX Mounting Pins are used with non-Genuine recovery boards, there is risk that the pins will not properly secure and the recovery boards may separate from the vehicle.
WILL THESE WORK WITH MY ROOF RACK?
MAXTRAX has partnered with most industry-leading roof rack manufacturers to provide you with a bolt-on Mounting Pin adapter.
Including: Eezi-Awn ⊕ Front Runner ⊕ Rhino Rack ⊕ Yakima ⊕ Prinsu ⊕ M-Racks ⊕ And more
If you’re looking to add a set of MAXTRAX Xtreme to your existing MKII Recovery Boards, we’ve got you covered there too. Check it out.
MAXTRAX MKII Black - MTX02BK
Perfect for maintaining an inconspicuous profile, MAXTRAX MKII Black are nearly invisible when mounted to your vehicle’s roof rack. Just make sure to use your included leashes when they’re buried in the mud at night.
Lifetime warranty against faults in materials and workmanship
Sold as a pair with two tell-tale leashes
Made in Australia, from Australian materials
Constructed from Australian-sourced fiber-reinforced, engineering-grade nylon
With 6 built-in handles and a shovel on each end, MAXTRAX are perfect for use in sand, snow, or mud
MAXTRAX are 45 inches long and 13 inches wide, they weigh 8 pounds each (Total shipped weight, 17lbs).
Height for two stacked: 3.3″, four stacked: 4.6″
Tested at the University of Queensland to completely wrap around a 33-inch tire without failure, while returning to shape
MAXTRAX MKII Black is the lightweight, vehicle recovery device that’s easy to carry and easy to use.
Don’t want your MAXTRAX to stand out? MAXTRAX MKII Black blends in seamlessly with your roof rack.
The aggressive large teeth grip onto the tire tread. In addition to these top cleats, specially designed teeth on the backside prevent the board from slipping backwards. This combination makes vehicle recovery quick and easy.
Made of UV-stable, flexible,super toughengineering-grade reinforced nylon.
At 8lbs each, MAXTRAX are easy to carry and place under your tires.
Six comfortable handles and patented double-shovel design makes it easy to clear debris from the front of your tires.
Patented keyhole design ensure the MAXTRAX are securely mounted at four points.
Measuring at just 45 inches long by 13 inches wide, each set of MAXTRAX stacks together at a height of just 3.3 inches. They are easy to store outside your vehicle with our Mounting Pins or Rear Wheel Harness.
After become stuck, use the MAXTRAX as a shovel to clear debris from in front of your tires. Wedge the MAXTRAX in front of your tires at a 45 degree angle. If in a two wheel drive vehicle, place the MAXTRAX in front of which ever set of wheels receive power. In a 4WD vehicle, ensure 4WD is engaged and place in front of the front tires, depending on where the vehicle is most bogged. Placing them at the front of the vehicle will give you an extra boost of momentum once your rear tires hit the MAXTRAX. Once properly placed, slowly begin to accelerate, do not spin your wheels. If the MAXTRAX are not engaging, they may need to be re-positioned, or more debris may need to be cleared. Once you have traction, maintain momentum until you reach firm ground. Retrieve your MAXTRAX and carry on!
For a more detailed instructional video,click here
Please note:Actual color may vary from images shown.
Warranty:We back MAXTRAX with alifetime warrantyagainst faults and defects.