MESO Customs - 2016-Current Toyota Tacoma Vent Ring Kit
The MESO Customs interior vent ring kit replaces the stock chrome bezels around your dash air vents. They come in a 4 pack and snap into the existing mounting slots. They have designed all rings to be identical and fit in any vent locations on the dash, simply double check the back for indications of which rotation to install into your dash. A subtle but clean upgrade removing the sun reflecting chrome rings around your AC vents. Available in a variety of factory matched colors (matches exterior paint.) Made to compliment both the Chrome Delete Kit and Climate Control Knob Kit (Manual or Dual Zone)
FITS: 2016+ Tacoma
Meso Customs 2016-Current Toyota Tacoma Ultimate Turn Signals
2016-Current Tacoma Mirror turn signals. Complete plug and play replacements. OEM fitment and quality but with increased light output. Custom smoke tinted outer lens with a high performance internal LED strip. Form and function at it's finest! Meso Custom's turn signal housings fit in your factory mirrors without any modification. Simply pop off your front mirror covers, remove your old turn signals and drop ours in. They even designed them with a load resistor built in so if this is the first LED mod on your truck you won't need to purchase additional resistors for your turn signal circuit.
2016 - 2020 Toyota Tacomas with factory mirror signals
3D Raised Tailgate Metal Letters for Toyota Tacoma -Matte Black
High Quality Design Tailgate Insert Letters, Easy to Install, 3D TACOMA Letters Design, fits for Toyota Tacoma 2016-Current, 12 Month Replacement Warranty, toyota tacoma accessories, Tacoma metal letters
ARB Compressor Mount Bed Side Toyota Tacoma - BCM0001EX
The first of its kind; a concealed and easily accessed compressor mount for the 2nd and 3rd Generation Toyota Tacoma 2007-2019
Mounts in place of the factory driver or passenger side rear storage box in the bed. Solid, secure and convenient. Facilitates re-installation of factory box lid after easy modification (trimming) of the lid flange and removal of the box.
Manufactured from 5052 .125 Aluminum and powder coated for superior corrosion resistance.
Includes mounting hardware for mount to vehicle
Mounting instructions included
Install time approx 1.0 Hrs excluding wiring of compressor
Holds both ARB Twin/Single, Viair and Smittybuilt Compressors
**Note- if installing a Viair or Smittybuilt compressor drilling is required in bottom tray for installation.
***This listing is for the Expeditions Essentials Compressor Mount ONLY. Compressor and lines must be purchased separately.
MESO Customs 2016-Current Toyota Tacoma Ultimate Map Lights
A sleek and functional map light replacement. New injection molded housings for an OEM fit and finish. Like the Ultimate dome, these replace the OEM clear lens completley. Includes a custom MESO PLUG" T10 bulb adapter for a 100% plug and play installation.
MESO Customs 2016-Present Toyota Tacoma Climate Control Knobs (Dual Zone)
This is a 3 pack of climate control trim rings made for the 2016-up Toyota Tacoma. They are made from injection molded ABS plastic and completely replace the OEM silver rings. Offered in 7 different colors to match and compliment the Chrome Delete Kit and Vent ring kits(sold separately). 2 Different versions are available depending if you have the MANUAL or DIGITAL DUAL ZONE CLIMATE CONTROLS.
If you are unsure which version you have, please refer to the picture to the left.
This listing is for the Dual Zone Climate Control Knobs only. If you are interested in the Manual Climate Control knobs, see HERE.
ARB BEDSIDE COMPRESSOR MOUNT EXTENSION HARNESS by Expedition Essentials
Take the guesswork out of installing your Bedside Compressor Mount with ARB Twin Compressor: with our new Extension Harness.
This 15' harness will enable you to install your on board air in the bed of your vehicle with room to spare.
Using ARB's exact specs for their supplied harness and stepping it up a notch with higher temp rated wiring. Identical connectors to ARB for a plug and play installation.
Finish your compressor install with ARB's supplied harness under the hood as intended.
Compatible with ARB Twin Compressor ONLY
This is for the HARNESS ONLY.. Air compressor and tray sold separately
Gibson Exhaust Systems Black Elite Cat-Back Single Exhaust Short Bed - 618814B
16-Present Toyota Tacoma 3.5L Cat-Back Single Exit Exhaust System, Stainless Steel W/Black Tip Short Bed- 618814B
Gibson Single Side Exhaust is perfect for improved acceleration, maximum hill climbing, towing and passing power. This is our best performing Exhaust System. Exits behind the rear tire. Quieter in the cab than any other Performance Exhaust. Dyno test results show it makes maximum torque and horsepower at low-end (1800 to 3000 RPM) with gains of 5-7hp and as much as 20 foot pounds of torque. Hassle free, bolt-on installation with professional looking results. No welding required. Backed by a Lifetime Limited Warranty.
Fitment notes: Crew Cab-Double Cab, Extended Cab- Access Cab (Fits Double Cab Short Bed or Access Cab Long Bed)
Gibson Exhaust Systems Black Elite Cat-Back Single Exhaust Long Bed - 618819B
14-PRESENT TOYOTA 4RUNNER LUXX-SERIES LED PROJECTOR HEADLIGHTS - MID-NIGHT BLACK
These Toyota 4Runner Luxx-series headlights will fit the following models:
14-20 Toyota 4Runner
We develop these Toyota 4Runner Luxx-series headlights based on its stock design and add a LED tube around the edge as DRL and sequential turn signal. At the side of these Toyota 4Runner Luxx-series headlights is the amber reflector lens, and there are amber halogen light bulbs at the side for turn signal light as well. The headlights also comes with activation light feature, which is a running light when you unlock your 4Runner. The outer projector is for low beam, while the inner projector is for high beam. The headlights are using LED chips, developed by our own factory, as light output for low beam and high beam.
We compose these Toyota 4Runner Luxx-series projector headlights with our patented rectangular projector lens. The projection cut-off line is perfect for American LHD regulation.
These Toyota 4Runner Luxx-series projector headlights come with switchback DRL, sequential signal light, and the signature activation light feature, which is a sequential light show when you unlock your car.
Our Toyota 4Runner projector headlights come with chrome, black and midnight black housing. The chrome housing gives your truck a stock housing look and match your truck if you have a lot of chrome accessories. On the other hand, the black housing gives your truck a sporty look and easily match with any color truck and front grill. Above all, the jet black housing and mid-night black housing (all black housing with glossy finish) are our special designed housing that has the glossy look mixed with the black paint, and it will give your truck a sporty and luxury look at the same time. Read this article to learn more detail aboutour headlights color housing.
Our Toyota 4Runner projector headlights are made of polycarbonate plastic lens. We also apply a layer of anti-fog agent on the headlights lens; thus, it allows better light output in extreme weather. In addition, we also apply another coating to protect the lens against yellowing and oxidation.
Our Toyota 4Runner projector headlights are compliant with SAE and DOT FMVSS108 regulations. Moreover, all our products are certified to ISO-9000, ISO-9001 and ISO-9002. Most importantly, we inspect every detail of the lights to make sure we are satisfied and so are our customers.